Via Cesanense, 74 - 61040 Castelvecchio di Monte Porzio - (PU) Italy - Tel. +39 0721 956011 - Fax +39 0721 956909

     - Feeders
     - Grizzlies GC
     - Crushers FR
     - Mills and hammerings
     - Unit for sand recovery
     - Cribles VV
     - Grizzly screens
     - Drum washing








































































Web site by Pubblinrete
PRODUCTS >> Feeders
Feeders type :
AP
AV
AVV

PRODUCTS >> FEEDERS >> AP

Mod. AP apron feeders are extremely sturdy and reliable machines, designed to feed primary crushers with rocky and big sized material. These machines are essentially composed of some steel aprons fixed to a very sturdy chain.

The chain and aprons advancement ensures that also the most heavy rocks are directed to the following machine mouth. Largely oversized transmission gears, oil bath sliding rollers, sliding parts interchangeable armour-plating. These feeders have been designed to withstand impact of the heavy blocks discharged in the hopper.

The capacity is adjusted by the variable - speed unit, that can be manual or electronic but in both cases without stopping the machine during the work.




PRODUCTS >> FEEDERS >> AV vibrating feeders

Mod. AV vibrating feeders are utilised to feed secondary machines with gravelly alluvial or pre-crushed material.
These machines are composed of a tank hung over the casing by helical springs.

The material advancement is generated by the vibration of the two eccentric motor-vibrators.

The capacity can be adjusted acting on the discharge mouth or on the eccentric masses of the motor-vibrators.
Thanks to a continues feeding and a variable capacity, the machine which follows will always work at full rating.


PRODUCTS >> FEEDERS >> AVV constrained vibrating feeders

Mod. AVV constrained vibrating feeders are utilised to feed secondary and primary machines with gravelly alluvial or already crushed material.

These feeders are composed of a fixed frame and a mobile carriage supported by four brackets provided with special rubber articulated joints, which don't need greasing or any other maintenance.

The carriage alternate movement, generated by a rods movement, causes the material advancement.
The capacity can be adjusted acting on the discharge mouth.

Thanks to the continuous feeding and the variable capacity, the machine which follows will always work at full rating.


 


Back to the home page